5/7/2023 0 Comments Hardware monitor calibration![]() If you use a NINJA V, NINJA V+, or SHINOBI 7, ensure that you have set the Remote mode in the Input menu to Calibration/LANC.You need to connect your calibration cable and ColorChecker to your PC/Mac first before launching the Atomos Calibrator software. Make sure that you follow the connection instructions.If you've connected the calibration cable to your PC/Mac via a Dock/Dongle and the Calibrator software can't detect your Atomos product, try plugging the calibration cable directly into the computer.However, there can't be two applications accessing a single ColorChecker at the same time, so it needs to be closed before you can go ahead and calibrate your Atomos product. You can calibrate computer monitors with your ColorChecker using this software. Check if the ccProfiler (formerly i1 Profiler for X-Rite branded devices) app is running in the background.If the Calibrator App doesn't detect your product Your device will be detected and the name of the device, eg. In the Atomos Calibrator software, press Detect.The foam seal around the sensor must sit flat on the LCD to ensure that no light can enter the sensor. Place the ColorChecker in the center of the LCD of your Atomos device and make sure that it doesn't move during the calibration process. Rotate the protective cover of the ColorChecker Display Pro (or Plus) to reveal the lens.On the NINJA V/V+, SHOGUN CONNECT and Shinobi 7, set the Remote mode in the Input menu to Calibration/LANC. Connect the 2.5mm jack of the USB to Serial cable to the LANC/Remote port of your Atomos device, and the USB connector into your Windows PC or Mac.Unpack the ZIP file and install the Atomos Calibrator software.Download the latest version of Atomos Calibrator software from our website:.Calibration should also be performed in a dark environment, at a temperature between 22˚C to 30˚C. A PC or Mac running a recent version of Windows or macOSīefore you follow the steps below to perform the calibration, the Atomos device needs to be switched on with pictures on the screen, and the ColorChecker Display Pro (or Plus) plugged into your computer via USB for at least 30 minutes.An Atomos USB to Serial Calibration cable. ![]() A Calibrite ColorChecker Display Pro or ColorChecker Display Plus (Formerly X-Rite i1 Display Pro or i1 Display Pro Plus – These will work just fine too).The latest version of the Atomos Calibrator Software.What you need to perform calibration of Atomos Devices: Atomos Calibrator software is used in conjunction with a Calibrite calibration device to perform calibration of Atomos devices. For details on the calibration of legacy products, please refer to the ' Calibrating Legacy Products' section at the bottom of this article.Ītomos have partnered with the leader in calibration technology, Calibrite, to open up professional display calibration to all filmmakers using our products. The following sections relate to calibration of current Atomos products. This version is available to download from the bottom of the page and supports the following products: To calibrate legacy products, Atomos Calibrator version 1.5 is required. The current version (v2.18) of Atomos Calibrator supports the following products: The calibration procedure for current Atomos products is slightly different than the calibration procedure for legacy Atomos products. Which Atomos products are supported for calibration? Calibration of your Atomos devices should be performed once a month to ensure that your colors stay consistent. Performing regular calibration is recommended to ensure that your Atomos device is displaying an accurate image. How often should you calibrate Atomos devices? This allows you to have the confidence to trust what you see on the display. C alibration is therefore highly recommended to ensure accurate color representation on Atomos Display devices. Every monitor in the field and the editing suite naturally drifts in color over time.
0 Comments
Leave a Reply. |